1889 naval gun breech - video

1889 naval gun breech. 1:23 video:

https://www.youtube.com/watch?v=UN1tOVzFrWY

I do believe that should be 'breech', not 'breach'.

Thanks, fixed! I actually "fixed" this once before, but only in the title, and not the body.

Breech is correct, guaranteed.
Provided use of adequate design and materials, it wouldn't 'breach' when fired.
Those in area of impact might soil their breeches...

Rack and pinion to open chamber nice enough. I'm more impressed with mechanism and accuracy to rotate and lock interrupted threads, starting with Victorian era machines capable of that manufacture. The interrupted section appears to be about 20-30 degree rotation. I fully expected buttress, Dardelet, or some proprietary asymmetric thread, not ACME.
My little Browning Auto SA-22's have that feature in quarter-turn for take down and strip, using an external nut to headspace. I'd offer a youtube video, any short version used embarrassingly inadequate firearm vocabulary, among other irritations.

Not different than misnaming a sheet metal bender as a 'break', taken most often as a verb. A 'brake' and to 'brake' differ from shattering something, where 'brake' intones a more controlled action, or of course the noun.

Ever wonder why with a million or more words in the English language there are so many instances where a single word can have not one or two but multiples of meanings , and too many words don't even know what they are nouns verbs additives etc.
I don't read or write Mandarin but I sometimes feel those folks may have gotten it correct 1 symbol ='s 1 word. although they often require a whole page of symbols to portray what a single word in the English language can do.
OH heck I give up

I went on a youtube journey following sugestions from the breech clip
https://www.youtube.com/watch?v=6BHe...re=emb_rel_end
i want one

This is one of common misspellings that trip my trigger.

Attachment 35649

I'd like to know the origin of calling the tool a "brake". When you bend sheet, you create a break in its linearity. Perhaps "brake" is a long-time ago misspelling that has worked its way into modern usage. Further murkiness comes from the fact that "brake" was an archaic past tense of the verb "break".

Quote:

---

Originally Posted by Crusty

This is one of common misspellings that trip my trigger.

---

OK - Ready for these, apparently even more common, then:
"Mispelled tattoes":
https://www.google.com/search?rlz=1C...ih=578&dpr=1.5

Sorry for derailing the thread...
At least related to "trig" in some off-hand way:

Attachment 35650

For you guys over the pond I blame the Pilgrim Fathers, if they took an accurate dictionary with them then half of the American words wouldn’t be misspelt - just saying,
its Analogue really.

Swede, this is one of my personal tattoo favorites.

Attachment 35651

Quote:

---

Originally Posted by mklotz

I'd like to know the origin of calling the tool a "brake". When you bend sheet, you create a break in its linearity. Perhaps "brake" is a long-time ago misspelling that has worked its way into modern usage. Further murkiness comes from the fact that "brake" was an archaic past tense of the verb "break".

---

I agree Marv. When I looked for such a tool, spelling was interchanged some at every level; vendor, manufacturer or distributors. While majority use 'brake' to define apparatus to bend sheet stock, individuals [private sales] often use 'break'. I suspect a high percentage of those are selling equipment from auctions or garage sales etc, even unaware what the thing even does, let alone proper name.
By the same token, searches for 'brake' return automotive drum and rotor turning machines too, and no recollection of those being labeled as 'break' drum [etc] lathes.