Printable View
1958 Brockway truck swing out maintenance fenders.
Fullsize image: https://s3-us-west-1.amazonaws.com/h...r_fullsize.jpg
https://s3-us-west-1.amazonaws.com/h...uck_fender.jpg
Previously:
https://www.homemadetools.net/forum/...252#post165612
https://www.homemadetools.net/forum/...457#post166324
https://www.homemadetools.net/forum/...750#post159720
https://www.homemadetools.net/forum/...368#post110288
https://www.homemadetools.net/forum/...358#post161785
Brockways were built about 45 minutes from me, to bad they are gone.
I saw a Jeep CJ that had swing-out fenders like this, though the hinges are on the cowl end. The hood latches hold them closed. Pretty genius, I thought.
Neil
Well since Brockway was bought by Mack.
Maybe this is the reason why the Mack C600 also had swing out fenders.
or at least the ones on mine do
expand the photo and you can see the hinges
Attachment 36894
just remove these 3 bolts and the fender swings out of the way
Attachment 36895
I used to own an 800 Dodge with nearly the same set up
