3D Printed Surface Adapter

The back surface on my Roland FP-10 electronic keyboard is crowned and smooth. Put my timer here and it slides off as I play. My solution was to 3D print a 3-inch by 2-inch platform which is congruent with this crowned surface on the bottom and flat on the top. I faced the flat surface with soft foam to provide additional grip.

Figuring out this curved surface was a challenge. I measured and guessed. By printing out 0.1" wide sections of this contour, I was able to get a sample in 6 minutes. The full 3 inch wide platform took about 2 hours.

If you are interested, please see https://www.thingiverse.com/thing:5899429

Rick

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks rgsparber! We've added your Keyboard Timer Platform to our 3D Printing category,
as well as to your builder page: rgsparber's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-keyboard-timer-platform"> <img src="/uploads/258579/homemade-keyboard-timer-platform.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-keyboard-timer-platform">Keyboard Timer Platform</a> <span> by <a href="https://www.homemadetools.net/builder/rgsparber">rgsparber</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/3d-printing'>3D printing</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->