Printable View
Hi all,
This is a job I have been wanting to do for a long time.....
4 x 6 Bandsaw upgrade using the Viceroy Royal 250 Shaper
https://www.youtube.com/watch?v=hbIXUHlZdqs&t=70s
Thanks to my subscribers for telling me the shapers ram is running incorrectly.
The back stroke should be the fastest not the forward stroke.Its a 3 phase motor running through a VFD so should be easy enough to change. Just got to do a bit of research on the net
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks MachineNZ! We've added your Bandsaw Vise Jaws to our Vises category,
as well as to your builder page: MachineNZ's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-bandsaw-vise-jaws"> <img src="/uploads/231908/homemade-bandsaw-vise-jaws.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-bandsaw-vise-jaws">Bandsaw Vise Jaws</a> <span> by <a href="https://www.homemadetools.net/builder/MachineNZ">MachineNZ</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/vise'>vise</a>, <a href='https://www.homemadetools.net/tag/bandsaw'>bandsaw</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->