Angle grinder nut removal tool - video

Printable View

Nov 18, 2021, 03:18 PM
Jon

Angle grinder nut removal tool - video

Angle grinder nut removal tool. By Dorel Borlea. 8:11 video:

https://www.youtube.com/watch?v=xM5uF6YiXwI
Nov 18, 2021, 07:35 PM
bob_3000

Really? Lame.
Nov 18, 2021, 09:26 PM
Isambard

To reinvent the spindle nut spanner due to a lack of dexterity, is a trifle mind-boggling.
The nut need never be more than hand tight.
Nov 19, 2021, 01:23 AM
tonyfoale

Quote:

Originally Posted by Isambard

To reinvent the spindle nut spanner due to a lack of dexterity, is a trifle mind-boggling.
The nut need never be more than hand tight.

I totally agree. I only ever tighten the nuts with fingers, as soon as you start using the tool the nut will tighten as much as required, if not more. Over tightening the nut is a sure way to have the thin blades break.
Nov 22, 2021, 02:04 PM
nova_robotics

Quote:

Originally Posted by Isambard

To reinvent the spindle nut spanner due to a lack of dexterity, is a trifle mind-boggling.
The nut need never be more than hand tight.

Absolutely, I agree. However... tradespeople. There's the first group who are probably too green to know any better and overtighten them, but they're acting in good faith. It's just a lack of experience. Then there's the second group. The d-bags who DO know better but spend all day showing everyone how strong and tough they are. They'll go out of their way to put that nut on so tight it'll never come off, just so they can watch you struggle. Because to caveman, if you struggle you are weak, and that makes them strong.