Angle grinder quick-change locking mechanism - GIF

Angle grinder quick-change locking mechanism.

<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/angle_grinder_quicklock_tp.mp4" type="video/mp4"> Your browser does not support the video tag. </video>


Previously:

https://www.homemadetools.net/forum/...300#post192296
https://www.homemadetools.net/forum/...371#post188893
https://www.homemadetools.net/forum/...423#post185443
https://www.homemadetools.net/forum/...187#post184658
https://www.homemadetools.net/forum/...296#post169348

Nice idea but I don't like that you would be constrained to a patented pattern of disk center. I am a big fan of open source and interchangeability.

Quote:

---

Originally Posted by NortonDommi

Nice idea but I don't like that you would be constrained to a patented pattern of disk center. I am a big fan of open source and interchangeability.

---

I have two grinders and one has a cutting disc and the other a grinding disc.

Same for the little ones. I need more - NEVER lend tools! Ideally you have a grinder each mounted with one of a cutting disk, a grinding disk, a flap disk a wire cup brush and a wire wheel brush.
That is just 100 or 125 mm's size. I have an old 180 mm's Rupes grinder that I love but 180 disks are getting hard to come by and by the time I wear down a 230 mm's disk it ends up on a 125 mm's grinder and a couple of el-cheapo swivel head 230 mm's one with a cutting disk and one with a grinding disk.

And how much are the discs?