Another lathe "work truing" tool
Hi,
this week end , I was turning a new Titanium ring and, in the middle of the work, just after separating the ring from the stock, I had to rechuck my ring in order to dress the cut face.
And suddenly, the light came, I remembered the recent post from Canobi : lathe "work truing" tool and realized that it was exactly what I needed right now.
So I quickly made my simple version of it out of what I happened to have in the scrap box :
A roller-blade ball bearing, a spacer also from the same roller blade, a screw, a piece of square section stock.
OK, the hole is not well centered, but who cares ?
http://www.labellenote.fr/file/homem...te_Tour_01.jpg
Here we go !
http://www.labellenote.fr/file/homem...te_Tour_02.jpg
http://www.labellenote.fr/file/homem...te_Tour_03.jpg
Of course, I tightened the chuck after truing the workpiece.
Thanks Mr Canobi , useful tool, I should have done that earlier (as always)