-
Another small mandrel...
This one was made to locate another steering wheel adapter plate to the rotary table.
I'll be milling an angle on the back side of the adapter to reduce the diameter to better match the shift unit.
This is the back side I will be milling. The pencil line is the size of the shifter unit.
https://images40.fotki.com/v20/photo...MVC005F-vi.jpg
Setting up the rotary table in the mill I needed an adapter to locate the plate concentric to the center of the rotary table. I machined this out of a piece of 1" diameter aluminum stock.
https://images15.fotki.com/v246/phot...MVC016F-vi.jpg
The larger end pilots in the center bore of the table and the small end pilots into the center hole of the plate. I used a long bolt and a couple of spacers to mount the plate to the table.
https://images54.fotki.com/v1642/pho...VC002F1-vi.jpg
continued in next post
-
-
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks astroracer! We've added your Small Mandrel to our Machining category,
as well as to your builder page: astroracer's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="http://www.homemadetools.net/homemade-small-mandrel">
<img src="/uploads/168357/homemade-small-mandrel.jpeg"/>
</a>
</div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="http://www.homemadetools.net/homemade-small-mandrel">Small Mandrel</a>
<span> by <a href="http://www.homemadetools.net/builder/astroracer_2">astroracer</a></span>
</div>
<div class="tags">tags:
<a href='http://www.homemadetools.net/tag/mandrel'>mandrel</a> </div>
</div>
</div>
</div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->