AXBB-E Ethernet CNC Controller #1 Basic Setup

Hi! Recently I've got a AXBB-E Ethernet CNC Motion Controller from CNCDrive.com. I find it very good after some tests and I decided to make some videos about setting it up. It allows to control up to 6 CNC axes including both linear and rotary motion. 0-5 or 0-10V output for VFD Spindle Control, 2 analog inputs for SRO / FRO etc. This is the first part where i show how to turn it on and connect with a computer. There will be some more video soon about setting up with a servo, spindle etc.
If you can afford it it is a great choice for homemade DIY CNC machines in my opinion. Especially because it has ethernet connection with the PC which is much more noise-resistant than LPT / USB controllers.

https://youtu.be/-C_wTI__1I8