Printable View
Hi! This is the second part of my tutorials in the topic of AXBB-E Ethernet CNC Motion Controller from CNCDrive. This time I made a video about how to wire up and setup the basic configurations of a cheap chinese AC Servo and the AXBB-E controller with UCCNC software. I think it might be handy for people getting into this type of work :)
https://youtu.be/PXzuZDxM0p0
An AC servo drive? That would be a great upgrade over steppers. It used to be that if you wanted to do any CNC conversions steppers were you only option. Just looking at the info in your Youtube video, this controller can handle up to 6 servos? That's awesome. Do you know if this controller works with LinuxCNC?
I'm already during testing these drives in my machine with use of this controller. These work pretty smooth and really quiet comparing to stepper motors. The accelerations seem to be pretty good too considering I have dovetail guides on my machine. Yes, this controller can handle up to 6 servos - if you want to use all of these axis then you probably need an port3 extension board (UCSB) to use the additional fast outputs. Sadly this conroller won't work with linuxCNC. It works with UCCNC, MACH3 and MACH4. At this point - I really recommend it with UCCNC. It's probably not as advanced as LinuxCNC but it seems to be more useful and fresh compared to the popular MACH3 (I didn't have any experience with MACH4 though).Quote:
Originally Posted by nova_robotics