Band Saw fixture plate

**bobs409** · Feb 9, 2019, 08:46 AM

My latest creation

is this fixture plate for a band saw. This allows you to cut small parts safely, even smaller than shown.

**jackhoying** · Feb 11, 2019, 04:17 PM

This is a real simple, but very well thought out fixture plate. I'll definitely be making something similar for my bandsaw.
Thanks,
Jack

**billd** · Feb 11, 2019, 04:24 PM

How do you handle 45 deg angle cuts?
Nice job for 90 deg cuts and small parts, I am trying to re engineer my band saw into a mitering one like ellis saw.

**bobs409** · Feb 11, 2019, 04:26 PM

Originally Posted by billd

How do you handle 45 deg angle cuts?
Nice job for 90 deg cuts and small parts, I am trying to re engineer my band saw into a mitering one like ellis saw.

Well that will still have to be invented. LOL This is of course only 90 degree cuts. I'm sure something with a 45 degree cut on the end could do it though...

**metric_taper** · Feb 11, 2019, 07:07 PM

Originally Posted by billd

How do you handle 45 deg angle cuts?
Nice job for 90 deg cuts and small parts, I am trying to re engineer my band saw into a mitering one like ellis saw.

I don't see anything in Bob's design that prevents the vise on the band saw from being moved to any angle of 0 to 45. Just put the other end of the square tube (leave one end square) in the vise, and cut it off to 45. Then it will be parallel to the blade cut. The threaded fixture holes and thumb wheel jack, will still hold the work piece.

I really like this fixture idea.
Thank you Bobs409!

**Toolmaker51** · Feb 11, 2019, 07:25 PM

Capital idea in use of tubing for a base, for others C-channel is good too. Accomplishing miters, at least some, are possible with Bobs409 tool.
The fixture is already in place, only need stops for locating material at positions other 90°. Extend range by widening plate between vise jaws. Builder could populate with more tapped holes as well.

**yves78** · Feb 11, 2019, 11:55 PM

Thanks ! I was looking for a solution for small parts, and I really like yours.
Easy and efficient, I'll do it.

**rossbotics** · Feb 12, 2019, 04:38 AM

Great idea, thanks for sharing

Doug

**wizard69** · Feb 13, 2019, 12:48 PM

For angles use angle blocks, sine bars or whatever on top of the 2x3. Shouldn’t be a big deal for shallow angles steeper angles would benefit from a larger block. More mounting holes wouldn’t hurt either. All in all an excellent idea.

**DIYer** · Feb 14, 2019, 06:07 AM

Thanks bobs409! We've added your Bandsaw Fixture Plate to our Workholding category,
as well as to your builder page: bobs409's Homemade Tools. Your receipt:

Bandsaw Fixture Plate by bobs409

tags: bandsaw, fixture

User Tag List

Thread: Band Saw fixture plate

LinkBack

Thread Tools

Search Thread

Display

Band Saw fixture plate

The Following 43 Users Say Thank You to bobs409 For This Useful Post:

The Following 3 Users Say Thank You to jackhoying For This Useful Post:

The Following User Says Thank You to billd For This Useful Post:

The Following User Says Thank You to bobs409 For This Useful Post:

The Following 2 Users Say Thank You to metric_taper For This Useful Post:

The Following 2 Users Say Thank You to Toolmaker51 For This Useful Post:

The Following 2 Users Say Thank You to yves78 For This Useful Post:

The Following 2 Users Say Thank You to rossbotics For This Useful Post:

The Following User Says Thank You to wizard69 For This Useful Post:

The Following 2 Users Say Thank You to DIYer For This Useful Post:

Thread Information

Users Browsing this Thread

Bookmarks

Bookmarks

Posting Permissions