Bench dogs for benchtop bench

[morsa]

Bench dogs were necessary accessories for the http://www.homemadetools.net/forum/b...xon-vise-53325. I made them in three different materials:

1- WOOD. I intended to make them on the lathe, but in the end it was lot easier making them on the router table with a jig I’ll show later.





2- PLASTIC. I don’t know what type of plastic it is. They were lathed on the Unimat lathe.







3- ALUMINUM. They were also lathed on the Unimat lathe.



Regards, morsa