The Best Tools for cleaning Carbs

The Best Tools for cleaning Carbs
I have not needed clean a carb in a few years and I am glad that I could not find my old carb cleaning kit
Using the needle with the precision air flow of the inflator worked like a charm
Disclaimer ( do not use wires or files to clean small passages in the carb it could effect emissions and performance )
All of the guys selling the carbs will say not to use anything to clean the small passages
So what can I do ? buy a new one
The carb in the video is from a Kolher CH740 on my small bobcat
It has 20 to 30 hours on the engine but it sat for three years a new carb shipping and taxes and duty about 500 CND
The last 2 post have been moved am I putting them in the wrong place ?


Ray
https://youtu.be/n9bntJpewIo

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks shopandmath! We've added your Carburetor Cleaning Setup to our Carburetor category,
as well as to your builder page: shopandmath's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-carburetor-cleaning-setup"> <img src="/uploads/225276/homemade-carburetor-cleaning-setup.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-carburetor-cleaning-setup">Carburetor Cleaning Setup</a> <span> by <a href="https://www.homemadetools.net/builder/shopandmath">shopandmath</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/cleaner'>cleaner</a>, <a href='https://www.homemadetools.net/tag/carburetor'>carburetor</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->

Have cleaned or rebuilt over a hundred carbs in my lifetime. I have never used anything that is metal for cleaning passages. Only small soft bristle brushes. Along with carb cleaner. Never seen a passage that needed extreme cleaning. Then brake cleaner and a blow out with air.

Hi mbshop
thank you for your reply
you are right in some cases the steel files might be overkill
on the last job i could not find me carb tool kit so i came up with this one
this worked very will the air blow tool was awesome nice two hand control what would make it better would be a foot control
another idea for the very small holes was to modify a real needle braes it to the tip of the inflater
what do you think ?
the only help i could get was 1(but a new carb) 2 (soak it in sea-foam)
Ray