4 Attachment(s)
bomb detonator unscrewing tool
Hi,
for an friend of mine, i've made an tool to unscrew the detonator of an bomb shell, wich can be very tight from oxidation due to gun powder .
the 'strips' are from an elctrical cabinet, were ik can screw modified M5 inbus screws in .
notice it is made with an axial bearing for better force reduction,
you can unscrew both 2 and 3 pin detonators,
the tool and shell are mounted with an
so before unscrewing i warm the shell on an electrical coocking plate, let it cool, and spray some WD40 and let it impregnate some days
i have made twoo levers on, wich i can lengten with an tube
it works fine, and the screw holes are not (or much less ) damagedn but i was surpriced by the neede force to unschrew
Attachment 35152Attachment 35153Attachment 35154Attachment 35155