![](https://pinterest.com/pin/create/button/?url=https%3A%2F%2Fwww.homemadetools.net%2Fforum%2Fshowthread.php%3Fp%3D37595%23post37595&media=https%3A%2F%2Fs3.amazonaws.com%2Fhmt-newsletter%2Fhmt_avatar_200.jpg&description=Brass Instrument Tubing Benders by Krankenmensch - I need to know how to make and use with ease a tool capable of bending brass tubing 180°, I believe the dimensions of this tubing are as follow: OD .695" (or ~17.65mm); ID .694=" (or ~17.63mm); Pipe wall .0215=" (or ~ .55mm). Please advise all information/instructions regarding working with BRASS [tubing]... not copper, steel, aluminum, etc. THANK YOU!
Krankenmensch= "Pin It")
I need to know how to make and use with ease a tool capable of bending brass tubing 180°, I believe the dimensions of this tubing are as follow: OD .695" (or ~17.65mm); ID .694" (or ~17.63mm); Pipe wall .0215" (or ~ .55mm). Please advise all information/instructions regarding working with BRASS [tubing]... not copper, steel, aluminum, etc. THANK YOU!
Krankenmensch
Hi Krankenmensch - welcome to HomemadeTools.net
Interesting tool build; please go ahead and post a new thread in the Help Me Build subforum, it has a very good response rate.
New: BuildThreads.com - 300+ build posts/day (with photos)
Wie krank sind Sie, mensch?
Most of the good tubing benders I've seen follow the design described here...
http://www.modelenginemaker.com/inde...8.html#msg1858
Plans are included but you will probably have to scale them a bit to the tubing sizes you need.
---
Regards, Marv
Smart phones are to people what laser pointers are to cats
Homo sapiens is a goal, not a definition
Hi Krankenmensch,
Welcome!
What are you planning to build with that brass tubing?
Ken
Welcome to the forums, Krankenmensch! Jon and Marv's suggested links look like a good place to start.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks