Printable View
I need to know how to make and use with ease a tool capable of bending brass tubing 180°, I believe the dimensions of this tubing are as follow: OD .695" (or ~17.65mm); ID .694" (or ~17.63mm); Pipe wall .0215" (or ~ .55mm). Please advise all information/instructions regarding working with BRASS [tubing]... not copper, steel, aluminum, etc. THANK YOU!
Krankenmensch
Hi Krankenmensch - welcome to HomemadeTools.net :welcome:
Interesting tool build; please go ahead and post a new thread in the Help Me Build subforum, it has a very good response rate. :)
Wie krank sind Sie, mensch?
Most of the good tubing benders I've seen follow the design described here...
http://www.modelenginemaker.com/inde...8.html#msg1858
Plans are included but you will probably have to scale them a bit to the tubing sizes you need.
Hi Krankenmensch,
Welcome! :welcome:
What are you planning to build with that brass tubing? :headscratch:
Ken
Welcome to the forums, Krankenmensch! Jon and Marv's suggested links look like a good place to start. :welcome: