New: BuildThreads.com - 300+ build posts/day (with photos)
Yeah, real labor saving device. 1 man placing the blocks on the machine 1 man operating the machine 1 man mixing the mortar and 1 man setting the blocks.
the old way 1 man supplies the mortar and hands the blocks to the mason who sets the blocks Both will place blocks near the work as needed
Never try to tell me it can't be done
When I have to paint I use KBS products
Those solid blocks might be a little heavier than cinder blocks...
If they are anything like the ones, I've seen used in the middle east they are about half the weight of a hollow cement block. I don't know what they were made of but you could scratch them with your fingernailOriginally Posted by IntheGroove
Never try to tell me it can't be done
When I have to paint I use KBS products
I dunno, the way the mortar squeezes out when the block is lowered those arent very light weight.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks