Checking the sensitivity on a hydraulic trimming machine.
<video controls autoplay loop>
<source src="https://diqn32j8nouaz.cloudfront.net/tooltalk_17170322884448.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>
Previously:
Disc trimming and stacking machine - GIF
Trimming a roof tile - GIF
Trimming a thatched roof - GIF
I might test it with a hot dog or sausage, but my hands are not going to be in a press break a shear, or near the saw blade of anything while it is spinning
Sucks to be the safety inspector in that shop!
Giving employees a false sense of security that the machine can't hurt you is one of the worst ides. Complacency is one of the biggest factors in injuries. "I've always done it like this" or "I've done it that way a thousand times and nothing ever happened before!" or "I guess I just wasn't paying attention that time". A momentary lapse can cause a lifetime of disability.
But I saw it on YouTube!Quote:
Originally Posted by Hoosiersmoker
Ask yourself how many times you would have to watch someone doing that before you would try it yourself.
If I were to see someone doing that to test the machines the first thing, I would do would be to explain to them just how stupid an idea that was to blindly trust a machine to be able to protect him from himself.Quote:
Originally Posted by mklotz
idiocy aside, I take it the laser curtain is set just above the thichness of the maximum sheet capacity of the press?
assuming it's a finger/ pan break, is there an overrride for working aorund prebent flanges? (think the tabs on the sides of a box being folded up)
if the laser can be adjusted, or overridden, then a test like shown is the worst way to breed complacency aorund machines.
if done for sales, I would still use a hotdog rather than what looks like a salesgirls hands.