Printable View
Another easy one for the mill. Small bracket and linkage made for an existing grinder chip shield that was removed when the grinder was re-purposed. (I hate throwing good stuff out so I just keep a couple of "junk boxes" in the shop.
Shield is articulating but I am going to slot the long arm that connects to the shield. The screw holes are not that convenient to use.
Cheers, JR
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks jjr2001! We've added your Mill Chip Shield to our Milling category,
as well as to your builder page: jjr2001's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-mill-chip-shield-2"> <img src="/uploads/214401/homemade-mill-chip-shield-2.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-mill-chip-shield-2">Mill Chip Shield</a> <span> by <a href="http://www.homemadetools.net/builder/jjr2001">jjr2001</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/mill'>mill</a>, <a href='http://www.homemadetools.net/tag/shield'>shield</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->