Free 173 Best Homemade Tools eBook:  
Become a founding member: 500+ tool plans, full site access, and more.

User Tag List

Results 1 to 3 of 3

Thread: Chucking an odd part in the 3 jaw with shims

  1. #1
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    7,459
    Thanks
    948
    Thanked 5,990 Times in 2,843 Posts

    Frank S's Tools

    Chucking an odd part in the 3 jaw with shims

    Its Friday afternoon you have every fitting to complete a project save one. the nearest fitting house that is only a probability of having the fitting you need is 40 miles away and they are not answering their phone after 3 PM for some reason. So you call all of the oilfield hose, pump and supply houses within a 70 mile radius none have what you need but there is a place 90 miles away who thinks they have one.
    Well I for one am not making a 180 mile round trip for a single fitting trying to make half the trip in under an hour for anything,
    I'll make my own if I can find a couple fittings to modify and weld together.
    to do this I needed to chuck a -6 to 3/8 NPT 90 elbow in my small lathe but it only has a 3 jaw chuck.
    Here is how I did it
    I placed the end to be cut off on a drill bit in the chuck on the tail stock guided it tot eh 3 jaw then shimmed 1 jaw to get it centered
    Chucking an odd part in the 3 jaw with shims-img_20211105_162421bf.jpg
    Chucking an odd part in the 3 jaw with shims-img_20211105_162829bf.jpg

    173 Best Homemade Tools eBook
    Never try to tell me it can't be done
    When I have to paint I use http://kbs.justoldtrucks.com/

  2. The Following 11 Users Say Thank You to Frank S For This Useful Post:

    asterix (Nov 9, 2021), baja (Nov 9, 2021), benkeller3 (Nov 8, 2021), cmarlow (Nov 14, 2021), mwmkravchenko (Nov 9, 2021), NortonDommi (Nov 10, 2021), olskoolsi (Nov 9, 2021), RetiredFAE (Nov 14, 2021), sossol (Nov 8, 2021), thevillageinn (Nov 13, 2021), Toolmaker51 (Nov 9, 2021)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,076
    Thanks
    659
    Thanked 1,608 Times in 1,442 Posts


    Thanks Frank S! We've added your Odd Part Chuck Holding Method to our Workholding category,
    as well as to your builder page: Frank S's Homemade Tools. Your receipt:




  4. #3
    Supporting Member mwmkravchenko's Avatar
    Join Date
    Nov 2017
    Location
    Perth Ontario Canada
    Posts
    415
    Thanks
    2,289
    Thanked 152 Times in 101 Posts
    DOne this more than once. Soft soldered some of them, Hard soldered other. When you are far from supplies you gotta get creative!



    173 Best Homemade Tools eBook

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •