Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 9 of 9

Thread: Coin cell nomenclature

  1. #1
    Supporting Member mklotz's Avatar
    Join Date
    Aug 2015
    Location
    LA, CA, USA
    Posts
    3,434
    Thanks
    357
    Thanked 6,380 Times in 2,117 Posts

    mklotz's Tools

    Coin cell nomenclature

    In a recent interchange with Rick Sparber I mentioned intelligent nomenclature systems. My wife asked me if I had a 2430 lithium coin cell for her alarm clock. I didn't but in searching around I discovered that those coin cell numbers have meaning.

    The first two digits are the diameter in millimeters and the last two digits are the thickness * 10 in millimeters. Thus a 2032 is two centimeters in diameter and 3.2 millimeters thick.

    Maybe this is common knowledge among the electrocicers but somehow I never ran across it before.

    186 More Best Homemade Tools eBook
    ---
    Regards, Marv

    Home Shop Freeware
    https://www.myvirtualnetwork.com/mklotz

  2. The Following 8 Users Say Thank You to mklotz For This Useful Post:

    baja (Nov 4, 2020), Bony (Nov 2, 2020), clydeman (Nov 2, 2020), homey_g (Nov 3, 2020), jimfols (Nov 2, 2020), Moby Duck (Nov 2, 2020), rlm98253 (Nov 2, 2020), trigger (Nov 2, 2020)

  3. #2
    Supporting Member Toolmaker51's Avatar
    Join Date
    Feb 2016
    Location
    Midwest USA
    Posts
    5,330
    Thanks
    7,041
    Thanked 2,977 Times in 1,892 Posts

    Toolmaker51's Tools
    Occasionally had to source odd coin cells too. There are charts online that sort by voltage and size; I hadn't noticed correlation to physical dimensions.

    2000 Tool Plans
    Sincerely,
    Toolmaker51
    ...we'll learn more by wandering than searching...

  4. #3
    Supporting Member Moby Duck's Avatar
    Join Date
    Jan 2016
    Posts
    387
    Thanks
    1,215
    Thanked 196 Times in 124 Posts

    Moby Duck's Tools
    I wonder if the intelligence that designed this rather simple measurement system didn’t then decide to make hundreds of different combinations of those sizes and throw in voltage, current and battery type variations just to annoy us.

  5. #4
    Supporting Member Bony's Avatar
    Join Date
    May 2015
    Location
    Tasmania, Australia
    Posts
    310
    Thanks
    44
    Thanked 176 Times in 62 Posts

    Bony's Tools
    Yet another good reason to adopt the metric measurement system!

  6. #5

    Join Date
    Nov 2019
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Sorry, but I guessed you meant the last 2 digit divided by 10 - not * (times) ?!
    Günter in Germany / used to mm,hi

  7. #6
    Supporting Member mklotz's Avatar
    Join Date
    Aug 2015
    Location
    LA, CA, USA
    Posts
    3,434
    Thanks
    357
    Thanked 6,380 Times in 2,117 Posts

    mklotz's Tools
    Quote Originally Posted by Bony View Post
    Yet another good reason to adopt the metric measurement system!
    Be careful here; nomenclature systems are not part of measurement systems unless specifically called out in the governing documents. I'm sure that the metric documents do not call out the way to name (number in the case of coin cells) a product.

    However, folks who use metric are probably drawn to its simplicity and regular features and carry this organization over into their naming.
    ---
    Regards, Marv

    Home Shop Freeware
    https://www.myvirtualnetwork.com/mklotz

  8. #7
    Supporting Member mklotz's Avatar
    Join Date
    Aug 2015
    Location
    LA, CA, USA
    Posts
    3,434
    Thanks
    357
    Thanked 6,380 Times in 2,117 Posts

    mklotz's Tools
    Quote Originally Posted by dc9lk-8 View Post
    Sorry, but I guessed you meant the last 2 digit divided by 10 - not * (times) ?!
    Günter in Germany / used to mm,hi
    thickness (mm) = last two digits / 10

    same, same as...

    last two digits = thickness (mm) * 10
    ---
    Regards, Marv

    Home Shop Freeware
    https://www.myvirtualnetwork.com/mklotz

  9. #8

    Join Date
    Nov 2019
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi, Marv!

    Again...your last writing is correct (mathematically), but that is not the same as what you wrote
    in your first statement. Keep your eyes on "thickness (mm)" is not equal to "thickness * 10 in millimeters", isn't it?
    Also IMHO it is not done to use centimeters and millimeters in one equation if pure math is concerned as well as
    all mesurements should use an equal number of digits behind the decimal point.

    If I'm totally wrong I will still admire all of your articles in this forum!

    Pse all of you members keep healthy!
    Yours
    Günter ( sri for any misspelling because learning english has been many moons ago as I've got more than 70 windings on my spool)

  10. #9
    Supporting Member Toolmaker51's Avatar
    Join Date
    Feb 2016
    Location
    Midwest USA
    Posts
    5,330
    Thanks
    7,041
    Thanked 2,977 Times in 1,892 Posts

    Toolmaker51's Tools
    Speaking of measurement nomenclature, "more than 70 windings on my spool" is most unique description of that condition I've heard



    186 More Best Homemade Tools eBook
    Sincerely,
    Toolmaker51
    ...we'll learn more by wandering than searching...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •