Printable View
Conduit joining technique.
<video controls autoplay loop> <source src="https://s3-us-west-1.amazonaws.com/hmt-forum/threading_conduit_trick.mp4" type="video/mp4"> Your browser does not support the video tag. </video>
Previously:
https://www.homemadetools.net/forum/...044#post199091
https://www.homemadetools.net/forum/...841#post156283
https://www.homemadetools.net/forum/...864#post186870
https://www.homemadetools.net/forum/...290#post200062
https://www.homemadetools.net/forum/...232#post172738
My next potato gun just got an upgrade!
Have to give that I try. That would not be code, but might work for a garden irrigation system. I have made a chamfer on one end of a pipe, then heated PVC pressed the pipe into make a bell then either glue or run a screw in hold them together, Of course the screw leaks a little but in the garden that is not tragic.
Never thought to try this, but could be a great way to fabricate while being able to disassemble. Thank you.
Technically, that isn't conduit. It is pipe. Conduit is used for wire. You'd never pull wire thru that 90.
At least not more than a 25 to 30% fill with small conductors.Quote:
Originally Posted by PDXsparky
Always hated having to use these in tight spaces
Attachment 43327
Attachment 43328
