Printable View
Copper tubing bender.
<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/coppertubing_bender.mp4" type="video/mp4"> Your browser does not support the video tag. </video>
Previously:
https://www.homemadetools.net/forum/...660#post147670
https://www.homemadetools.net/forum/...869#post148557
https://www.homemadetools.net/forum/...764#post148158
https://www.homemadetools.net/forum/...697#post147846
https://www.homemadetools.net/forum/...339#post146323
I've had one for years but it works just as well for bending steel fuel and brake lines
That looks somewhat easier to get accurate bends than the one i have that doesn't have the calibrations marked thereon.
Horrible things to use, I much prefer the Swagelok benders with wheels rather than a fixed shoe. I have every size from 1/4 tight rad to 1/2 and some metric ones, 1/2 s/s is a real workout even with the wheels.
The miniature version of the tool shown in the OP...
https://www.harborfreight.com/1-8-ei...der-94571.html
will handle tubing down to 1/8" diameter. Works well for plumbing miniature steam engines.
And the miniature steam?Quote:
Originally Posted by mklotz