Printable View
If you need to precisely cross drill a piece of pipe, a V block and a drill press are the answer. If you just want to roughly knock a hole through it, locating the holes by eye is fine. But if you want to cross drill with more accuracy than eyeballing it yet don’t want to fuss with a V block, then this tool might fill your needs. It uses a scrap tape measure.
If you are interested, please see
http://rick.sparber.org/CDTT.pdf
Your comments are welcome. All of us are smarter than any one of us.
Very clever, Rick - and very useful!! :thumbsup:
Ken
Rick,
This is very useful and a great way to cross drill even larger diameter pipe too large for v-blocks. It could be used for large diameter wooden posts (I hate it when drilling cross holes from each side of the posts and totally miss where the holes should meet near the center).
Thanks,Paul
Thanks Rick! We've added your Cross Drilling Tape to our Measuring and Marking category, as well as to your builder page: Rick Sparber's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/cross-drilling-tape"><img src="http://www.homemadetools.net/uploads/138740/cross-drilling-tape.jpeg" /></a></div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/cross-drilling-tape">Cross Drilling Tape</a> <span> by <a href="/builder/Rick+Sparber">Rick Sparber</a></span> </div> <div class="tags">tags: <a href="http://www.homemadetools.net/tag/drilling">drilling</a>, <a href="http://www.homemadetools.net/tag/tape-measure">tape measure</a></div> </div> </div> </div>