Printable View
Deployable road matting system.
<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/road_mat_roller_ma24.mp4" type="video/mp4"> Your browser does not support the video tag. </video>
Previously:
https://www.homemadetools.net/forum/...113#post217978
https://www.homemadetools.net/forum/...658#post186200
https://www.homemadetools.net/forum/...871#post160021
https://www.homemadetools.net/forum/...534#post128098
https://www.homemadetools.net/forum/...497#post154916
A lot easier than trying to lay PSP landing matt to make a road.
It looks interesting, but it also looks like it's one of those things that you could use once. Crane mats and swamp mats are super thick for a reason, and they still get chewed up and destroyed. I feel like if you drove over this once those ribs are going to bend. After a few vehicles it's going to be "U" shaped.
I suspect you are correct. I have a couple of 7 by 10 ft mats that work really well for a semi tractor but even then, if the concentrated weight of jack staands supporting a truck is left on them for an extended period of time they will deform even at over 3 inches thickQuote:
Originally Posted by nova_robotics
Perforated steel landing mat needed a relatively stable base under it as well once all panels were interlocked after a few landings you could almost never count on relocating it to another landing zone. but it made a great motor park surface and good hooch's and trench liners.