Dial Indicator Holder for the QCTP

I have a QCTP for the 250-001 size. This is the small one for the 6 to 9" lathe.
I also have a few of the larger Dial Indicators that I want to use with this lathe.
This QCTP indicator holder fits the need.

It is easy to setup with a 10-32 allen head cap screw for 3 distances from the lathe center which
is in addition to the cross slide travel. Two 10-32 allen SHCS are used to retain the indicator and
one to position the main arm on the QCTP adapter mount.
This one is all T-6061 aluminum from my stock so I did not have to purchase anything to build it.
Best thing about it.....Well it is Quick and only has 2 parts plus the screws.

Full prints are in this post. Check it out!

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks jjr2001! We've added your Dial Indicator Holder to our Measuring and Marking category,
as well as to your builder page: jjr2001's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-dial-indicator-holder-22"> <img src="/uploads/271981/homemade-dial-indicator-holder-22.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-dial-indicator-holder-22">Dial Indicator Holder</a> <span> by <a href="https://www.homemadetools.net/builder/jjr2001">jjr2001</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/dial-indicator'>dial indicator</a>, <a href='https://www.homemadetools.net/tag/holder'>holder</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->