Dirt sifter redux

[C-Bag]

Thanks Paul.

I have one of those HFT tubing rollers so the 3/4" pipe cross frame and the 1/2" rod were both rolled on it. If I ever get time I'm going to adapt the pipe threader to the roller too. That 40rpm that thing runs at is very handy and it's very powerful. But like most HFT's it needed some work after a while because one of the circlips in the gearbox popped off in reverse because they hadn't cut the groove for it deep enough. Luckily I heard it bog down and turned it off right away. So it didn't destroy anything and I was able to cut the retaining groove deep enough and it's been working good for a bunch of hours and yards of rock now(as he knocks on his wooden head ).