Disc Sander

Disc Sander Plans - $10.00

https://s3.amazonaws.com/tool-plans/DiscSanderCover.png

$10.00 - Click here to buy now via PayPal and download instantly

These plans include:

• A 72-page PDF instruction manual.
• Dozens of technical (ANSI) drawings and color photographs.
• Table of tools needed.
• Bills of Materials.
• Table of Contents.
• Index.
• List of Purchased Parts with Suggested Vendor & Part Number.
• Lots more....

https://s3.amazonaws.com/tool-plans/disc_sander1.png

Feel free to post any questions you may have in this discussion, either before you purchase, during construction, or post pictures of your finished disc sander.

Questions about buying tool plans? See: http://www.homemadetools.net/forum/f...6068#post65876

$10.00 - Click here to buy now via PayPal and download instantly

This looks like a very substantial,easy to build with or without welding:cool:

Quote:

---

Originally Posted by barsyl4041@netzero.net

This looks like a very substantial,easy to build with or without welding:cool:

---

Thank you Barsyl4041. Any questions?

Nice work!

Why not make it direct drive?
With the pulley sizes in the illustration it looks like this will be spinning very fast.
Approx 5,000 RPM with a 4 pole motor?

Quote:

---

Originally Posted by Wmrra13

Nice work!

---

Thank you.

Quote:

---

Originally Posted by Wmrra13

Why not make it direct drive?

---

It would have been too long for my shop. I have lot and lots of vertical room but not so much lateral room. A guy in Australia made one from my plans but it was free standing. I wish I'd thought of that.

Quote:

---

Originally Posted by Wmrra13

With the pulley sizes in the illustration it looks like this will be spinning very fast.
Approx 5,000 RPM with a 4 pole motor?

---

Aprox 6000 RPM. Pulley size is not cast in concrete though. The builder can use whatever pair of pulleys he or she is comfortable with. The rigid disc I am now using (rather than a paper one) is rated for 6000 RPM so I set up my pulleys to get that speed. I had originally intended it for a rigid disc but a friend and co-conspirator (Colin) expressed concern that if one of those detonated we'd all be killed. After a month or so of changing paper discs, I'd had enough and switched to a rigid disc. That was in 2012 and the original one is still in use today. I'm keeping close tabs on it but, even If it detonates, the shield is made of really heavy stock and will contain the debris.

Quote:

---

Originally Posted by nhengineer

Quote:

---

Originally Posted by Wmrra13

Nice work!

---

Thank you.

Quote:

---

Originally Posted by Wmrra13

Why not make it direct drive?

---

It would have been too long for my shop. I have lot and lots of vertical room but not so much lateral room. A guy in Australia made one from my plans but it was free standing. I wish I'd thought of that.



Aprox 6000 RPM. Pulley size is not cast in concrete though. The builder can use whatever pair of pulleys he or she is comfortable with. The rigid disc I am now using (rather than a paper one) is rated for 6000 RPM so I set up my pulleys to get that speed. I had originally intended it for a rigid disc but a friend and co-conspirator (Colin) expressed concern that if one of those detonated we'd all be killed. After a month or so of changing paper discs, I'd had enough and switched to a rigid disc. That was in 2012 and the original one is still in use today. I'm keeping close tabs on it but, even If it detonates, the shield is made of really heavy stock and will contain the debris.

---

Thanks for the explanation.

Does 6k rpm seem fast? What diameter is the disc?

Also, please tell me more about the rigid disc, that's very interesting to me. I tried to google them but it defaults to the brand Ridgid and they are paper, and far from rigid.

[QUOTE=Wmrra13;87713]

Quote:

---

Originally Posted by nhengineer

Quote:

---

Originally Posted by Wmrra13

Nice work!

---

Thank you.



Thanks for the explanation.

Does 6k rpm seem fast? What diameter is the disc?

Also, please tell me more about the rigid disc, that's very interesting to me. I tried to google them but it defaults to the brand Ridgid and they are paper, and far from rigid.

---

This one is from Zozo Tools ( https://www.zoro.com/dewalt-depresse...33/i/G2891874/ ). Good company.

I 'believe' the 9" is rated for 6,000 max but the graphic is too blurry to read. Nope, down below is written 6,600 RPM MAX. Graniger has a 9" disc on clearance for $8.50 ( https://www.grainger.com/product/DEW...epressed-5TU42 ).

Now I get it, those are what we'd consider grinding wheels/discs. I never thought to use one like that as a "sanding disc", that's a pretty good idea.

Quote:

---

Originally Posted by Wmrra13

Now I get it, those are what we'd consider grinding wheels/discs. I never thought to use one like that as a "sanding disc", that's a pretty good idea.

---

Yup but it can be tricky using them for sanding with a hand grinder. With a stationary grinder/sander you have much more control since you're moving the work, not the abrasive. The old German (Fritz O. Best) that I apprenticed for drilled into my head NOT to leave burrs and sharp edges on my work; and I do mean drilled. He was a real hard-ass but most often right especially with sharp edges. So for all the years afterwards I have been conscious of the hazard of cutting myself of, worse yet, a customer (or the shop inspector). Breaking a sharp corner on a small piece with a 9" grinder is a real challenge. That's the reason for my disc sander project.

1400rpm direct drive works really well and I made the basic structure with MDF, plywood would work well in it's place:
Sanding Disc – glue-it.com

Attachment 18552 This is 6" and must admit that even with this you have to be careful not to burn the wood. I really wouldn't want to go much faster than 1400rpm. Have used this for a number of years now and it has served me well. I've put more images on my website to help with the design, but you will need to size the basic structure for the motor you have and the disc size. The motor is 300W and if you use it hard it is still possible to stall it with just a 6" disc. I've also added a link to a supplier of the sticky backed discs in the UK

Quote:

---

Originally Posted by editor@glue-it.com

1400rpm direct drive works really well and I made the basic structure with MDF, plywood would work well in it's place. This is 6" and must admit that even with this you have to be careful not to burn the wood. I really wouldn't want to go much faster than 1400rpm. Have used this for a number of years now and it has served me well. I've put more images on my website to help with the design, but you will need to size the basic structure for the motor you have and the disc size. The motor is 300W and if you use it hard it is still possible to stall it with just a 6" disc. I've also added a link to a supplier of the sticky backed discs in the UK

---

Nice job editor@glue-it.com but my design is intended for metal working. I doubt it would work very well with wood.

Hi David,
You don't say what colour the bolts have to be (much tongue in cheek).
Regards,
Rob.

Quote:

---

Originally Posted by old kodger

Hi David,
You don't say what colour the bolts have to be (much tongue in cheek).
Regards,
Rob.

---

Yeah, just plain old zinc-chromate color would be fine.

:hattip: