-
DIY CNC Plotter
I built a 2' x 2' CNC plotter with some aluminum H-section extrusion and old 3D printer parts. It runs GRBL firmware on an Arduino Uno with a CNC shield stacked on top. Let me know what you think!
-Michael
https://www.youtube.com/watch?v=1JLT-_8Azt8
-
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks m2rechtin! We've added your CNC Plotter to our CNC category,
as well as to your builder page: m2rechtin's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="https://www.homemadetools.net/homemade-cnc-plotter-4">
<img src="/uploads/224596/homemade-cnc-plotter-4.jpeg"/>
</a>
</div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="https://www.homemadetools.net/homemade-cnc-plotter-4">CNC Plotter</a>
<span> by <a href="https://www.homemadetools.net/builder/m2rechtin">m2rechtin</a></span>
</div>
<div class="tags">tags:
<a href='https://www.homemadetools.net/tag/cnc'>CNC</a> </div>
</div>
</div>
</div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
-
Nice,on my list going to be looking for some help especially with the motor drive control.
Ralph