LinkBack URL
About LinkBacksJoining another piece of printer shaft with 8.0 mm of scrap with a bearing number 608-2Z, we still could make an edge finder! Despite its a very old trick, it works perfectly and the cost is almost zero!
Joining another piece of printer shaft with 8.0 mm of scrap with a bearing number 608-2Z, we still could make an edge finder! Despite its a very old trick, it works perfectly and the cost is almost zero!
Last edited by machining 4 all; Aug 5, 2020 at 12:54 PM.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks