how i made my shopmade drip feed oiler for cutting fluid:
https://youtu.be/bVF7D3NtAYk
Greetings from Brazil
Celso Ari
Printable View
how i made my shopmade drip feed oiler for cutting fluid:
https://youtu.be/bVF7D3NtAYk
Greetings from Brazil
Celso Ari
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks celsoari! We've added your Cutting Fluid Dispenser to our Lathe Accessories category,
as well as to your builder page: celsoari's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-cutting-fluid-dispenser"> <img src="/uploads/233753/homemade-cutting-fluid-dispenser.png"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-cutting-fluid-dispenser">Cutting Fluid Dispenser</a> <span> by <a href="https://www.homemadetools.net/builder/celsoari">celsoari</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/drilling'>drilling</a>, <a href='https://www.homemadetools.net/tag/cutting'>cutting</a>, <a href='https://www.homemadetools.net/tag/oiler'>oiler</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
nice idea - I've just fitted a smaller one of those oilers tot he SB13 I am restoring... was the "glass" actually glass, or plastic?
celsoari;
One machine I'm bringing home is an ironworker. Punching dies thrive with mere drops of fluid. The bottles don't reach in very well, and then only near the tip. I will emulate your design with the smallest wicking tube I can find, dispensing far higher on the shank. Gravity and punch entrance to workpiece will do the rest.
Thank you from North America!