LinkBack URL
About LinkBacks
converting a mill to 3 axis CNC with inexpensive steppers=&software:="A conventional milling machine Wabeco F1200 - but it should work with any brand -
is upgraded into a 3 axis CNC mill using stepper motors and an inexpensive Estlcam control based on an Atmel 328P="Arduino=" microcontroller.
Programming is done di= "Pin It")
Professor Rieg is at it again! (@ Institute of Engineering design & CAD of Uni Bayreuth)
converting a mill to 3 axis CNC with inexpensive steppers & software:
"A conventional milling machine Wabeco F1200 - but it should work with any brand -
is upgraded into a 3 axis CNC mill using stepper motors and an inexpensive Estlcam control based on an Atmel 328P "Arduino" microcontroller.
Programming is done directly using G code, thus neither a CAD program nor a CAM program is necessary." (35 min video)
Caution: Unprotected welding on the mill might concern some sensitive viewers!
Reply With Quote
.
LinuxCNC "Pin It")
Bookmarks