DIY Universal Track saw guide with self clamps

[Didpoolhall]

Today I'll show you how to make an MDF jig, this is universal jig basically circular saw into a fully functioning Track Saw but you can use this for router guide, jigsaw guide and for fence table saw.
i complete this track saw with self clamp, very practice not need addtional clamp again, easy for use and very cheap. make this onle need under $10.
hope this video can give inspired

[Altair]

Thanks Didpoolhall! We've added your Track Saw Guide to our Jigs category,
as well as to your builder page: Didpoolhall's Homemade Tools. Your receipt:

Track Saw Guide by Didpoolhall

tags: guide

[Ralphxyz]

Great saved it thank you!! There are lots of 4' guides and tracks I need to make 8' cuts. Nobody has a 10' track possible I could mill some aluminium
or maybe wood to make up a 10' track.

Ralph

[Didpoolhall]

thank you hope this tutorial can give some inspired to make 10' track.
i give new modification to this track, give extra grip on bottom