DIY Welding Rod Holders - Rod Oven Alternative (4K)

Keep your welding rods dry. I don't have space for a rod oven, so I have to keep my rods dry from the start. I made these air tight holders and put rods in there straight from the package. Works pretty well; don't see any signs of water/rust on the rods after months of storage.

https://www.youtube.com/watch?v=lqSh...ature=youtu.be


Materials Used:
- PVC pipe (diameter big enough to hold 1 pack rods. Length about 2 cms or 1" longer than rods, including end caps)
- 1 Female end fitting
- 1 Male cap for end fitting
- 1 Pipe cap
- Pipe glue
- Bolt or other for grip
- (optional) brass plug for flush hole
- Teflon tape


WARNING: The video depicts acts and work that, if done wrong or used improperly, can lead to injury or death. By watching this video, you agree the video's producer is not responsible for any such damage, injury or death. Always use proper safety procedures and safety equipment. If you don't know, learn first or don't do it.

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks tsbrownie! We've added your Welding Rod Storage Canister to our Storage and Organization category,
as well as to your builder page: tsbrownie's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-welding-rod-storage-canister"> <img src="/uploads/230355/homemade-welding-rod-storage-canister.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-welding-rod-storage-canister">Welding Rod Storage Canister</a> <span> by <a href="https://www.homemadetools.net/builder/tsbrownie_3">tsbrownie</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/storage'>storage</a>, <a href='https://www.homemadetools.net/tag/welding'>welding</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->

Flushing with inert dry gas is a great idea. What about making a removable screened area in the screw cap to hold some of those 'Do Not Eat' desiccant packs that we seem to get with most everything?

I simpler method would be to install a check valve and vacuum pack the rods in storage.
The same method would re-dry damp rods at room temperature overnight.

Good idea. And with the steel bolt there you can use a strong magnet to hold it in place.