5 Attachment(s)
Drill press chuck extension
Hi
Chuck in my drill press doesn't hold little drills.
Its for 4mm-16mm. So far i have used dremel workstation drill press with smaller holes.
I wanted to use dremel diamond cut off wheel with it.
Also dremel workstation ain't very accurate to drill metal, so this fix that issue too.
I had smaller chuck, it was with 3/8" thread, but i had no suitable threaded rod, so i re-threaded it with M12
Then used M12 threaded rod to connect smaller chuck to the drill.
Now i can use drills between 0-16mm. Its quick to change and allows me to use my drill with dremel bits too.
Attachment 19874
Easy to adjust lenght if needed.
Attachment 19875
Wanted to use diamond cut off wheel to re-use broken glass jar.
Attachment 19876
Attachment 19877
Attachment 19883