LinkBack URL
About LinkBacks
![](https://pinterest.com/pin/create/button/?url=https%3A%2F%2Fwww.homemadetools.net%2Fforum%2Fshowthread.php%3Fp%3D100914%23post100914&media=https%3A%2F%2Fs3.amazonaws.com%2Fhmt-newsletter%2Fhmt_avatar_200.jpg&description="Drill Station=" / Mount for the Mag Drill. by Ed Weldon - Tuomas - Thanks for the info on saws and blades. Should work well on another project of mine involving long cuts in .125=" (approx. 3mm) hot rolled steel sheet.
Another comment: Your video is an excellent presentation of what can be done with a magnetic based drill. I'm getting a little old to lift and carry one of those things; but I have a small hydraulic shop crane on caster wheels adapted from a hospital patient li= "Pin It")
Tuomas - Thanks for the info on saws and blades. Should work well on another project of mine involving long cuts in .125" (approx. 3mm) hot rolled steel sheet.
Another comment: Your video is an excellent presentation of what can be done with a magnetic based drill. I'm getting a little old to lift and carry one of those things; but I have a small hydraulic shop crane on caster wheels adapted from a hospital patient lift rated to 300 pounds. The crane breaks down into two sections, mast, boom and hydraulic cylinder and the other a 4 caster base frame.
Reply With Quote
Bookmarks