-
DRO Print Hanger
The arm on my DRO is a great place to hang prints. if it was steel and not aluminum I could use magnets. So, I made a simple steel plate and screwed it to the arm so I COULD use magnets. Not a big deal but it does makes life a little simpler. :)
https://images47.fotki.com/v1402/pho...MVC012F-vi.jpg
With a print hanging it is a good thing.
https://images52.fotki.com/v1639/pho...MVC013F-vi.jpg
Mark
-
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks astroracer! We've added your Printout Hanger to our Machining category,
as well as to your builder page: astroracer's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="http://www.homemadetools.net/homemade-printout-hanger">
<img src="/uploads/168053/homemade-printout-hanger.jpeg"/>
</a>
</div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="http://www.homemadetools.net/homemade-printout-hanger">Printout Hanger</a>
<span> by <a href="http://www.homemadetools.net/builder/astroracer_2">astroracer</a></span>
</div>
<div class="tags">tags:
<a href='http://www.homemadetools.net/tag/magnet'>magnet</a>, <a href='http://www.homemadetools.net/tag/holding'>holding</a> </div>
</div>
</div>
</div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->