Free 186 More Best Homemade Tools eBook:  
New: 300+ fresh build posts/day from 275 forums → BuildThreads.com

User Tag List

Results 1 to 10 of 10

Thread: Engesa Boomerang walking beam suspension - video

  1. #1
    Supporting Member Altair's Avatar
    Join Date
    Aug 2013
    Posts
    12,020
    Thanks
    1,365
    Thanked 31,320 Times in 10,051 Posts

    Engesa Boomerang walking beam suspension - video

    The Brazilian-made Engesa EE-25 utility cargo truck featuring its "Boomerang" rear axle with walking beam suspension.




    Previously:

    Tracked pickup truck - photo
    Hydraulic leg truck turning assist - video
    Fence washing truck attachment - GIF

  2. The Following 12 Users Say Thank You to Altair For This Useful Post:

    Andyt (Feb 14, 2019), baja (Feb 17, 2019), emu roo (Jan 16, 2026), KustomsbyKent (Feb 14, 2019), MIGuy (Feb 16, 2019), mwmkravchenko (Feb 14, 2019), PJs (Feb 17, 2019), ranald (Feb 18, 2019), Scotty1 (Feb 13, 2019), Seedtick (Feb 13, 2019), sossol (Feb 14, 2019), Toolmaker51 (Feb 13, 2019)

  3. #2
    Supporting Member Toolmaker51's Avatar
    Join Date
    Feb 2016
    Location
    Midwest USA
    Posts
    5,355
    Thanks
    7,074
    Thanked 3,572 Times in 2,210 Posts

    Toolmaker51's Tools
    Torque +Traction +Ground Clearance =Git 'er done.
    Sincerely,
    Toolmaker51
    ...we'll learn more by wandering than searching...

  4. The Following User Says Thank You to Toolmaker51 For This Useful Post:

    emu roo (Jan 16, 2026)

  5. #3
    Supporting Member Steved53's Avatar
    Join Date
    Apr 2018
    Location
    UK
    Posts
    46
    Thanks
    65
    Thanked 53 Times in 20 Posts

    Steved53's Tools
    I think Scammell used a walking beam on their Pioneer trucks back in the 1930s..... With full 6 wheel drive they went nearly anywhere.Engesa Boomerang walking beam suspension - video-pioneer-6x6-trailer.jpg

  6. The Following 2 Users Say Thank You to Steved53 For This Useful Post:

    emu roo (Jan 16, 2026), Jon (Feb 14, 2019)

  7. #4
    Supporting Member Radioman's Avatar
    Join Date
    Jun 2018
    Location
    Massachusetts
    Posts
    209
    Thanks
    11
    Thanked 117 Times in 72 Posts

    Radioman's Tools
    Mack has been using walking beams for a century!
    From the video I can’t see exactly how the power is transmitted to each one of the rear wheels. If I had to guess I would say there’s a chain inside the walking beam transmitting power to each of the rear wheels and the chain is being powered from the center pivot point. Of course this is just MHO?
    I think the driver has to re-read the book and understand what constitutes a running start.

  8. The Following 2 Users Say Thank You to Radioman For This Useful Post:

    IAMSatisfied (Feb 17, 2019), Toolmaker51 (Feb 14, 2019)

  9. #5
    Supporting Member KustomsbyKent's Avatar
    Join Date
    Dec 2014
    Location
    South Dakota
    Posts
    275
    Thanks
    2,845
    Thanked 231 Times in 133 Posts

    KustomsbyKent's Tools
    That is one hell of a bad @ss truck! I want one!

    I bet a bit more weight on the rear end would actually help it get more traction for climbing. The articulation is fascinating to watch over the rough stuff.
    Thanks for sharing.

  10. The Following User Says Thank You to KustomsbyKent For This Useful Post:

    emu roo (Jan 16, 2026)

  11. #6
    Supporting Member
    Join Date
    Dec 2014
    Location
    Gone
    Posts
    136
    Thanks
    79
    Thanked 44 Times in 37 Posts
    Quote Originally Posted by Radioman View Post
    Mack has been using walking beams for a century!
    From the video I can’t see exactly how the power is transmitted to each one of the rear wheels. If I had to guess I would say there’s a chain inside the walking beam transmitting power to each of the rear wheels and the chain is being powered from the center pivot point. Of course this is just MHO?
    I think the driver has to re-read the book and understand what constitutes a running start.
    Gear reduction boxes are mounted on the rear axle. The wheels are then mounted to the reduction box hubs. No chains were harmed. I believe Portal made those.

  12. The Following 2 Users Say Thank You to Loose Ctrl For This Useful Post:

    emu roo (Jan 16, 2026), Toolmaker51 (Feb 14, 2019)

  13. #7
    Supporting Member sossol's Avatar
    Join Date
    Oct 2012
    Location
    Lafayette, Indiana
    Posts
    671
    Thanks
    900
    Thanked 539 Times in 296 Posts

    sossol's Tools
    That engine was making some beautiful noise. Sounded like a 2-stroke Diesel.

  14. The Following User Says Thank You to sossol For This Useful Post:

    emu roo (Jan 16, 2026)

  15. #8
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    12,618
    Thanks
    2,677
    Thanked 11,115 Times in 5,394 Posts

    Frank S's Tools
    One huge advantage that truck has is the single rear differential powering a motor-grader type enclosed chain drive to stubbed independent axles allowing for extreme vertical movement Another advantage over a 6 wheel drive truck with 2 rear ends is at all times both tires on either side have weight distributed to them evenly due to the power coming from the center of the walking beam this also lends for a much wider range of from front left to right rear and vice versa.
    I have little doubt that if the truck had a cargo bed with some weight in it the truck could have traversed the hill each time on the first attempt.
    Yes the engine does have a sound like that of a 2 stroke engine possibly a 6 71 Detroit . The transmission sounds like it may also have several gears with a close ratio pattern but there were times when the driver was not utilizing the sweet spot of the torque range to its full effect possibly due to not up-shifting and down shifting at the optimum times

    In my opinion the truck is a winner winner chicken dinner for a rough service off road lower speed transport vehicle. Equally as effective as a 10 times more complex modern vehicle used by the US Military 1000's fewer parts. but over all lacking in the protections and comforts the US military has become so spoiled to.
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  16. The Following User Says Thank You to Frank S For This Useful Post:

    emu roo (Jan 16, 2026)

  17. #9
    Supporting Member ranald's Avatar
    Join Date
    Jan 2018
    Location
    Black Mountain Queensland
    Posts
    1,342
    Thanks
    996
    Thanked 534 Times in 400 Posts

    ranald's Tools
    I was expecting ,with all that fun, the driver would do 6 wheeled donuts.

    Thanks for posting.

  18. The Following User Says Thank You to ranald For This Useful Post:

    emu roo (Jan 16, 2026)

  19. #10
    Isambard's Avatar
    Join Date
    Aug 2019
    Location
    Hawke's Bay, New Zealand
    Posts
    181
    Thanks
    0
    Thanked 77 Times in 51 Posts
    Their 6 x 6s were still being built with it in the 60s...There is one locally.



    2,500+ Tool Plans

  20. The Following User Says Thank You to Isambard For This Useful Post:

    emu roo (Jan 16, 2026)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •