Free 173 Best Homemade Tools eBook:  
Become a founding member: 500+ tool plans, full site access, and more.

User Tag List

Results 1 to 2 of 2

Thread: Fitting coolant tank to 4x6 bandsaw

  1. #1
    Supporting Member thehomeengineer's Avatar
    Join Date
    Nov 2017
    Location
    Berkshire UK
    Posts
    611
    Thanks
    612
    Thanked 1,620 Times in 342 Posts

    thehomeengineer's Tools

    Fitting coolant tank to 4x6 bandsaw

    Hi All
    After finishing the rewire the next job was to mount the coolant tank to the custom base. The coolant tank is a commercially purchased system I purchased 30 years ago and was originally on my pillar drill.

    To stop the tank from moving, it was clamped to the base with 4 pieces of aluminium angle 32x32x5mm.

    The angle was cut and the edges machined square. A hole was then drilled into each bracket 6mm for 6mm bolt. The brackets were then slightly bent to create a clamping action when fully bolted back to base.

    To ensure that all the retaining bolts were drilled in the correct position to create the clamping force a piece of the angle was drilled 2mm higher to allow for the thickness of the tank material at a diameter of 3mm. Once drilled 3mm the diameter was then opened up to suit M6 rivet nuts.

    A trial fit and the tank was securely fitted to the base. Brackets were then removed and painted.

    Fitting coolant tank to 4x6 bandsaw-854d7123-e868-4a6b-96a7-8eadeba57ba9.jpeg Tank secured in place.

    Fitting coolant tank to 4x6 bandsaw-ded143e4-4ed8-4a9a-a9e4-50065520b7c1.jpeg Drill template and brackets shot blasted ready for paint.

    Fitting coolant tank to 4x6 bandsaw-a18e0c14-7202-48c3-9b3e-f82c9ed50053.jpeg Drill template in position.

    Fitting coolant tank to 4x6 bandsaw-2ae5a946-f9e7-4b9e-b280-af0133824c2a.jpeg Fitting coolant tank to 4x6 bandsaw-93ed4369-0e9d-4d69-a644-3558fbf04c95.jpeg Fitting coolant tank to 4x6 bandsaw-9781da11-fb3f-4094-a8db-fed24b31931e.jpeg Fitting coolant tank to 4x6 bandsaw-e0a2bf22-b96e-475a-a38c-460cd9fc6330.jpeg Rivet nut in place.

    Fitting coolant tank to 4x6 bandsaw-43b5894c-3ee0-4d77-b693-0f7fa0608e74.jpeg Square showing angle to create clamping force.

    Fitting coolant tank to 4x6 bandsaw-a0a957cd-affd-4123-b238-508a7cb7b691.jpeg One completed bracket in place.

    Thank you for viewing
    The Home Engineer

    173 Best Homemade Tools eBook

  2. The Following User Says Thank You to thehomeengineer For This Useful Post:

    Philip Davies (Jan 4, 2022)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,076
    Thanks
    666
    Thanked 1,628 Times in 1,459 Posts


    Thanks thehomeengineer! We've added your Bandsaw Coolant Tank Mounting to our Bandsaws category,
    as well as to your builder page: thehomeengineer's Homemade Tools. Your receipt:




Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •