Flat surface knurler. By Swap lamp. 15:15 video:
https://www.youtube.com/watch?v=padBm0aBYXM
Printable View
Flat surface knurler. By Swap lamp. 15:15 video:
https://www.youtube.com/watch?v=padBm0aBYXM
Fantastic video! Thanks!
What's going on with that carbide insert for the lathe at the beginning of the video? I've never seen that before. How is it held in the holder?
The insert is threaded and the bolt comes through from the other side. If the bolt sheers it drops out from the tool - a lot easier than removing a broken bolt from the tool, it is also easier to remove the broken bit of the bolt from the insert.