-
1 Attachment(s)
Flint striker
[ATTACH=CONFIG]32203[/ATTACH
It seems that nobody has posted one of these before on this site.
I was surprised when a search revealed no results, because, although obsolete, it’s quite a popular novelty item( like candle holders-which I don’t make either)
I was mainly sanding things in the workshop, but had the fire going to keep warm, so using the latent heat, I would tap this into shape gradually, over the course of three days! So I did not use the air pump. As the fire diminishes, I shovel the glowing embers into a lidded steel box, and that’s my charcoal for when I want a white/yellow heat.
It’s made from a worn file. Although ergonomic, I do not care for the shape much, it’s a bit of an abortion, if you’ll pardon the allusion.
-
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Philip Davies! We've added your Flint Striker to our Forging and Casting category,
as well as to your builder page: Philip Davies's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="https://www.homemadetools.net/homemade-flint-striker-4">
<img src="/uploads/228028/homemade-flint-striker-4.jpeg"/>
</a>
</div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="https://www.homemadetools.net/homemade-flint-striker-4">Flint Striker</a>
<span> by <a href="https://www.homemadetools.net/builder/Philip+Davies">Philip Davies</a></span>
</div>
<div class="tags">tags:
<a href='https://www.homemadetools.net/tag/flint-striker'>flint striker</a> </div>
</div>
</div>
</div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
-
The shape is a little...lumpy-ish, but that gives it some handmade charm. I should someday see if my mom still has the wrought door-knocker I made in my HS welding/forging class...THAT was only-a-mother-could-love-it ugly :-)
-
I agree that the lines are not quite as sweet as a French curve drawing aid, or did you mean that there were hammer marks visible? I think that for craft fairs it is an advantage that the forging is a bit rough, so that it is obviously hand-made, although technically, smithwork should not be “lumpy”!
-
I meant the lines, not the hammer work...'not as sweet as a french curve' is a better description.