Flower...

Just did something..

Made my small anvil for this kind of purposes.

Cuts with angle grinder.

Attachment 25064

Shaped with hammer and anvil.

Attachment 25065

Hi! Tuomas Great Job On the beautiful Rose & the anvil looks cool too - I have a 2 foot piece of Heavy Duty RR that I got years ago
it has a 6" wide Face is about 8.5 " tall and the Base or foot is almost 10 " across & weighs 74 lbs - don't know what it was used for
& I found it in an old abandoned junkyard on property my Brother -in law bought around 30 yrs ago!
Have been watching your Youtube videos but haven't commented because I'm busy trying to clean my shop up after five years of
letting it set because of neck & back injuries & multi-Surgeries but I'm back at it Now!!
IgotHeliFever !!

Quote:

---

Originally Posted by slick_silver

Hi! Tuomas Great Job On the beautiful Rose & the anvil looks cool too - I have a 2 foot piece of Heavy Duty RR that I got years ago
it has a 6" wide Face is about 8.5 " tall and the Base or foot is almost 10 " across & weighs 74 lbs - don't know what it was used for
& I found it in an old abandoned junkyard on property my Brother -in law bought around 30 yrs ago!
Have been watching your Youtube videos but haven't commented because I'm busy trying to clean my shop up after five years of
letting it set because of neck & back injuries & multi-Surgeries but I'm back at it Now!!
IgotHeliFever !!

---

Thanks mate. Im happy that you have watched. :)

This is the finished result: Attachment 25100

Attachment 25101

This was simple to make. No dremeling etc..
What do you think? Should i make a new video from this "limited" tools rose?

Quote:

---

This was simple to make. No dremeling etc..
What do you think? Should i make a new video from this "limited" tools rose?

---

Simple for you maybe, but remember watching your 2 part Dremel version a couple of years ago and was blown away. Would love to see you do this on an anvil if you are up to it. At your convenience! :cool:

PJ

Quote:

---

Originally Posted by Tuomas

Thanks mate. Im happy that you have watched. :)

This is the finished result: Attachment 25100

Attachment 25101

This was simple to make. No dremeling etc..
What do you think? Should i make a new video from this "limited" tools rose?

---

I always enjoy your videos and have learnt much from your methods so keep them coming if you feel inclined.

Tuomas the Rose is more beautiful everytime I see it & that horseshoe Heart is Awesome!
Yes please make a Video of how to make the Rose ! My Wife thought it
was the most Beautiful Metal Rose we ever Seen!!

Thanks Tuomas

Nice, I too would like to see how you make the rose.

Ralph

Quote:

---

Originally Posted by PJs

Simple for you maybe, but remember watching your 2 part Dremel version a couple of years ago and was blown away. Would love to see you do this on an anvil if you are up to it. At your convenience! :cool:

PJ

---

Thanks. And sorry again my late response. Somehow i miss these notifications sometimes.

I tought i could make little longer video about it.
Those are made using only angle grinder, hammer, pliers and my tiny anvil. That earlier video was made little too complex way, personally i like that result is better without polishing too much.

This is my work in progress atm...

Attachment 25138

It was asked "shiny" result.. that takes much more time, and imo: result is plain...

Quote:

---

Originally Posted by olderdan

I always enjoy your videos and have learnt much from your methods so keep them coming if you feel inclined.

---

Thank you very much.
I will make a video from this rose version soon. Atm im making a video about making axe.. Rose comes after that.

I have noticed that i'm little bored about tool making ( too much measuring and accuracy ).
So, its time to use them for a while.

Quote:

---

Originally Posted by slick_silver

Tuomas the Rose is more beautiful everytime I see it & that horseshoe Heart is Awesome!
Yes please make a Video of how to make the Rose ! My Wife thought it
was the most Beautiful Metal Rose we ever Seen!!

Thanks Tuomas

---

Thanks. That's very nicely said. I will post the video to this thread when its done.

Quote:

---

Originally Posted by Ralphxyz

Nice, I too would like to see how you make the rose.

Ralph

---

Thanks Ralph.

Nice work Tuomas !!!! How do I find you on youtube?

Quote:

---

Originally Posted by MountainMan

Nice work Tuomas !!!! How do I find you on youtube?

---

Sorry my coffee hasn't kicked in yet,,,,I just seen the link in your signature. I will subscribe now :beer2: