folding materials roller for swing away band saw

[Frank S]

Here is my folding roller I made today for my band saw
First I had to use the steady rest I made a couple days ago so I could bore the ends to accept the bearings

Next was to cut the mounting tabs that would fit in the "E" track slots on the door

Next was to weld the mount and attach the roller assembly

Next was to check the alignment in all positions


Next to see how well it tucked away I will have to eventually get a better holding strap or a shorter bungi cord when it is folded up out of the way

[Frank S]

I'm not sure why 2 of the photos showed up rotated

[DIYer]

Thanks Frank S! We've added your Folding Roller to our Metalworking category, as well as to your builder page: Frank S' Homemade Tools. Your receipt:

Folding Roller by Frank S

tags: roller