Hammer Brass Aluminum Steel 6.5 ounce head

I needed a few small hammers for my shop. My store bought ball peen hammer was
a bit too heavy for light work as was the set of hammers I made a while back.
http://www.homemadetools.net/forum/b...821#post105498
http://www.homemadetools.net/forum/h...820#post105496
http://www.homemadetools.net/forum/s...822#post105499

I was targeting 8 oz for the heaviest and ended up with 6.5 ounce for the brass head.
The handle is shorter than my earlier hammers but still has considerable weight.
Handle was turned from 3/4 brass and the heads are all turned down to 7/8".
The heads are 2.250" long. They feel pretty good and I think they will work out fine.
One brass, one aluminum, and one steel. Only one handle was made which saves some
space in my tool box. The thread is 3/8-16 so that handles and heads may be exchanged
between most of my shop made hammers.

I think I have hammers covered!

Cheers, JR

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks jjr2001! We've added your Hammer to our Hammers category,
as well as to your builder page: jjr2001's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-hammer-19"> <img src="/uploads/221942/homemade-hammer-19.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-hammer-19">Hammer</a> <span> by <a href="http://www.homemadetools.net/builder/jjr2001">jjr2001</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/hammer'>hammer</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->