https://www.youtube.com/watch?v=PUzg...2&index=1&t=5s
Printable View
For checking your taper while still having it chucked in the lathe before the tang is milled you can cut the end out of in your case a #2 to#3 morse adapter this way it becomes a test sleeve that you can view both ends of the taper you are turning
Thats a good idea. Thanks
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks winkys workshop! We've added your Tailstock Die Holder to our Lathe Accessories category,
as well as to your builder page: winkys workshop's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-tailstock-die-holder-16"> <img src="/uploads/254015/homemade-tailstock-die-holder-16.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-tailstock-die-holder-16">Tailstock Die Holder</a> <span> by <a href="https://www.homemadetools.net/builder/winkys+workshop">winkys workshop</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/die-holder'>die holder</a>, <a href='https://www.homemadetools.net/tag/tailstock'>tailstock</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->