Printable View
Helmet visor tear-off films.
<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/mud_racing_peeling_visor.mp4" type="video/mp4"> Your browser does not support the video tag. </video>
Previously:
https://www.homemadetools.net/forum/...037#post164649
https://www.homemadetools.net/forum/...481#post151160
https://www.homemadetools.net/forum/...869#post171363
https://www.homemadetools.net/forum/...358#post150641
https://www.homemadetools.net/forum/...471#post131905
At that rate, he will soon be blind.
Always a good time when you accidentally grab the entire stack of tear offs and pull them on the first lap. Makes for a long race of flicking mud chunks and driving.
Quote:
Originally Posted by Altair
Hope that was a short race. Looks like he'll burn through that stack quickly.
Looks like he might run a risk of missing a shift hope it's a short track.
How the heck can he grab a single film with that heavy glove on his hand?
They have tabs, I used ones that had a hole in the tab. You fold the tabs hole on the first on over the pin, put the next tear off on, fold over the tab and repeat. Then when you pull one, the next tab is sticking up for you to pull on.
https://www.northstarmotorsports.com...duct4/3319.jpg
You can only stack so many as they do reduce visibility, have to do a swag on how many you will need for given track conditions. It always seemed like as soon as you pulled the last one off, the car in front of you would go low and throw a big blob of mud on your bare visor.