Free 173 Best Homemade Tools eBook:  
Become a founding member: 500+ tool plans, full site access, and more.

User Tag List

Page 4 of 4 FirstFirst 1 2 3 4
Results 31 to 33 of 33

Thread: Homebuilt 9mm Handgun Suppressor

  1. #31
    Supporting Member
    Join Date
    Jun 2019
    Posts
    23
    Thanks
    15
    Thanked 56 Times in 11 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Jughead's Tools
    Quote Originally Posted by Frank S View Post
    Ok now that all of the clap flap is over and done with.
    There is one question I've not read either asked or answered.
    My limited experience with various sound suppressing devices attached to a fire arm has shown some to reduce the muzzle velocity by varying amounts some to the point of a noticeable amount of additional recoil felt in the weapon also greatly reducing the foot pounds second or meter kilograms seconds in your case. greatly altering the anticipated penetration depth of a particular round.
    have you had a chance or inclination to preform any tests which could offer you a determination of a round's effectiveness striking the target.
    Accuracy is always a primary concern but you seem to have managed to be able to dial in a predictability to that issue. I might add in a most intriguing way I'm trying to remember if or where I had seen that method before.
    Bear in mind I make no claim to be a gunsmith even a novice one even though I have repaired my fair share of fire arms.
    I unfortunately don't have the means of testing the energy levels etc, but even over a longer distance (30M) rounds still appear effective and still on target as they would be without the suppressor. I do believe though the the wet suppressors or suppressors that contain the rubber wipers tend to reduce the velocity somewhat. I have never fired one, so wouldn't be able to confirm that though.

    Since the round leaving the barrel in my case doesn't come into contact with anything inside the suppressor, I do not believe that there will be a noticeable or measurable difference. What I do feel though is a noticeable reduction in recoil, but that I would assume (bad word) is due to the added weight so far forward on the barrel.

  2. #32
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    6,402
    Thanks
    806
    Thanked 4,961 Times in 2,420 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Frank S's Tools
    Sometimes people associate recoil with muzzle rise or drift if fired the way of the boys in the hood
    But the overall weight of a weapon in ratio to powder charge versus projectile grain would have a lot to do with it.
    Never try to tell me it can't be done
    When I have to paint I use http://kbs.justoldtrucks.com/

  3. #33
    Supporting Member delta tango's Avatar
    Join Date
    Sep 2020
    Posts
    3
    Thanks
    1
    Thanked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Hi everyone, I'm a brand newbie here, so please take this with a grain of apprehension.
    I've done some minor experimenting with suppressing firearms, (.22 Cal. only) and found that BOTH those with removable cups, as well as those with an angular insert can be further quieted with the addition of rubber washers coated with Flex-Seal -- OR bits of felt cloth coated with Flex-Seal. Non-hardening silicone caulk works also. I don't own any sound measuring devices, however, the decibel reduction is quite noticeable. I based my theory that bare metal reflects noise, and sticky rubber OR cloth ABSORBS IT. You might try a few similar experiments and may find significant improvements in sound reduction. Not to brag, but I have one particular piece (using SUB-SONIC ammo of course) down to a minor *CLICK*. It was so quiet, I thought I had a misfire. 2 B continued...


    Post your reply!
    Join 42,532 of us and get 500+ tool plans, tool eBooks, build guides, and much more.



    eBooks for Supporters

  4. The Following User Says Thank You to delta tango For This Useful Post:

    Jon (09-20-2020)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •