How To Make A Simple Drip Feed Oiler (For Your Milling Machine)

G'day everyone and welcome back, this video will show you a simple way to get a Drip Feed Oiler on your milling machine, without a great amount of liquid (some drops are 90% enough for our works) and with a cheap system that can be installed easily on milling machines and lathes too.
The Oiler offers some drops or a continuous flow, but in that case the table of the milling machine must be prepared for the discharge of the liquid (the Sieg SX3L is but I do not need to use it).

Hope you’ll enjoy the video, and you will find my small idea an inspiration for you!
Alberto.

https://www.youtube.com/watch?v=lhC2PXW3tL8&t=1s

Looks good. I like it. I'm going to make one then immediately forget to close the valve when I'm done milling.

Hi Nova_robotics, thanks for you comment! I decided to make it becasue i noted that the switch works in normally open position and i have to say that is useful
and you can obtain a good surface finish too!! The blue valve was add by me because the original one didn't close enough!!
Happy that you liked the video !! A big Ciao from Italy, Alberto

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks AB-SHOP! We've added your Drip Feed Oiler to our Machining category,
as well as to your builder page: AB-SHOP's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-drip-feed-oiler"> <img src="/uploads/257001/homemade-drip-feed-oiler.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-drip-feed-oiler">Drip Feed Oiler</a> <span> by <a href="https://www.homemadetools.net/builder/AB-SHOP">AB-SHOP</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/oiler'>oiler</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->