Hi here is a new kind of chisel (to be used with the hammer) for metal engraving :
The blade is of the same kind as for the hand tools, made out of a HSS jigsaw blade.
The tip is turned down to a diameter equal to the width of the blade. Then using the slitting saw on the lathe, I cut the slit for the blade, which is a little thinner than the slitting saw thickness.
Then I turn a steel sleeve to cover the blade. The blade is inserted after filling the slit with a bit of epoxy paste.
Here is the guide that I follow for the sharpening angles :
Post your reply!
Join 42,532 of us and get 200+ tool plans, tool eBooks, build guides, and much more.
Sorry my mistakes in english.
to share your tip >>> http://www.homemadetools.net/forum/tool-tips-tricks/ <<<
There are currently 1 users browsing this thread. (0 members and 1 guests)