Printable View
I bought this tool from the restore because I do not know what the end is used for
It’s a scraper there was 2 of them this ones end opens up and click locks in place
With some kind of hex on the inside
I can not see using this tool as a driver ?
If you know what its for let me know
Ray
Attachment 30230
having a hard time uploading photos
The tool is designed for scraping paint, like on the side of a house, etc. It is supposed to be a multi-tool.The hex is for a screw driver bit. It comes with a double ended straight/phillips. It can also be used as a narrow scraper.
Just a gimmick in my opinion. I was a sucker, and got one. The bit was always falling out. If you use the butt to set a protruding nail, you mess up the flip out thing.
you are right
the tool just falls out what junk
and even with the smallest bit it will not close ?
trying to attach photoAttachment 30241
The bit it comes with is very short, flat on one end, phillips on the other. I lost mine in the grass the first day, within the first 1/2 hour.
I have one in my toolbox at work, works fine if you need to remove a screw without climbing down and back up the ladder for a screwdriver when you're scraping paint. Like all multi-tools, it's a compromise. Better than nothing, not as good as a single-purpose tool. I didn't buy it, just found it in a bunch of tools left by a previous tech. It does come in handy.
